JD-600 is a type of two-component clear epoxy paint. With the combination of colored quartz sand, you can achieve a bright & colorful surface with different patterns. The coating is hard and wear-resistant. It is mainly used for the floor of shopping mall, hotel, café, restaurant, office building etc.
JD-D10 is a two-component solvent epoxy primer. It has good penetration and sealing power on the porous substrate, such as concrete and water whetstone, etc. It can reinforce the substrate strength and provide good adhesion.
It is also an all-purpose primer for epoxy series paints and used as the undercoat or putty coat after used together with quartz sand or quartz powder.
1. Beautiful, seamless, dustproof and easy to clean.
2. Strong adhesion, small shrinkage
3. Corrosion-resistance to the general chemicals.
4. Good abrasion resistance and durability.
Requirements for the base:
1. Concrete strength≥C25;
2. Flatness: the maximum altitude difference of 2M running rule<3mm.
3. The moisture content of the base<4%. Water-proof layer is recommended under the concrete floor.
4. Press polish of the concrete base with cement mortar is recommended.
Touch dry: 8-12 hours
Hard dry: 2 days
Compressive strength (Mpa):≥85
Impact resistance strength (Kg·cm): 50
Flexural strength (Mpa):≥7
Tensile strength (Mpa): ≥9
Abrasion resistance(750g/500r, CS-17, g)≤0.06
Service life: 25years
Undercoat: 1kg/sqm(paint)+6-8kg(colored sand)
Top coat: 0.3kg/sqm
Sanzhou Industrial Zone, Lunjiao, Shunde, Foshan City, Guangdong Province China
Cell phone for 24 hours: 0086-15013002770(Miss.Cathy Wang)