Maydos modifed SBS Adhesive/glue mainly use for bonding all kinds of materials
Model: AA06 Modified SBS Adhesive/Glue Description: Maydos Modified SBS Adhesive (AA06) is formulated from excellent materials. It has good features such as easy application, rapid drying speed, strong viscosity, anti-ultraviolet radiation after solidification, anti-damp and aging-resistant. Where to Use: It is suitable for bonding different materials such as plywood, board, floorboard, wallpaper, veneer, anti-firing plate, fiber, aluminum-plastic plate, leather etc. Features: 1. Healthy: Adopt benzene free, no hazardous materials and additives, low VOC, protect the applicator and consumers health. 2. High solid content: Solid content exceeds 34%, much higher than conventional adhesive, effectively save adhesive consumption (dosage) by 30%-40%. 3. Freezing temperature resistant: no influence at -15 to -20. It is easy for transport and bonding in winter. 4. Super first-bonding power, good penetration property, fast drying. 5. Stable performance: moisture resistant after hardening, water-immersion resistant, good impact resistant, long service life. Technical Index: Appearance: light yellow viscous liquid Viscosity: 7501000 mPa. S/25 Solids Content: 37.5±1.5% Shear Strength: 30 minutes ≥ 0.7mpa 48 hours ≥ 1.1mpa Specific Gravity: 0.83-0.85kg/L VOC≤ 504 g/L Application: 1. Surface treatment: the grease, dust, moisture on the bonding surface must be cleaned 1 off. Surface of bamboo, leather or rubber etc must be matted. 2. Brushing: the effect will be better if you stir thoroughly or make the pot inverted repeatedly in order to mix the glue before use. Apply the adhesive in thin layer, brush toward a same aspect to give out the air so as to strengthen the powerful viscosity. 3. Airing: wait for 5 to 30 minutes (25 Celsius) after brushing, until the condition is proper to agglutinate. 4. Bonding: Aim the two bonding surfaces and try to do the bonding in one time because the viscosity is super powerful, add pressure or tapping with a hammer. Packing: 0.7L, 1L, 3L, 4L, 15L, 18L, 200L Dosage: 3-5SQM/kg Application Tools: Brusher, Scroller, Spatula, Trowel, etc. Storage Condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5 - 35 Celsius, and the relative humidity shall be <80%. Shelf Life: 12 months Good Reminds: 1. The most suitable temperature and humidity for contacting (bonding): ≥5, humidity: ≤85% 2. Adhesive contains VOC, easily burnt, keep away from fire. Make sure the room is well ventilated during application. 2. No. of Regulation On Transporting Dangerous Goods: 32196 3. This product conforms to China National Mandatory Standard: GB18583-2001: Requirement of Limits of Harmful & Hazardous Material Formaldehyde<0.5g/kg Benzene<5g/kg Toluene+ Dimethylbenzene<200g/kg Total Volatile Organic Compound<750g/L.