--Supplier of Top furniture company and real-estate enterprises.
--Cooperation with BASF,Akzo Nobel,etc to guarantee quality.
We are top 5 paint company & brand in China, 1200 workers, 25000 m2 non-dust workshop, 17 years experience , ISO certificated, 40 minutes drive from Guangzhou Airport.
We provide Paint products and Glue products,including emulsion wall paint for interior and exterior,floor paint,primer,putty,etc
Sanzhou Industrial Zone, Lunjiao, Shunde, Foshan City, Guangdong Province, China
Cell Phone for 24 hours: +8613923296933(MR.Frank Wen)
Maydos Car Parking Epoxy Resin Floor Paint Colors on Concrete Floor of Garage
JD-2000 is a two-component solvent-free epoxy floor paint. Nice appearance, dust &corrosion resistant and easy to clean. The flooring system can bond well with the solid base and has good abrasion and wearing resistance. Meanwhile, it has certain toughness, brittle-resistance and can stand a certain weight. The compressive strength and impact resistance ability is also excellent.
1. Seamless, dust-proof and easy to clean
2. Solvent-free and environmental
3. Dense corrosion-resistance surface
4. Bright &smooth surface
Where to Use:
It is mainly used for the non-dusty and non-bacteria areas like pharmaceutical factory, hospital, precision machinery, electronic factory, etc.
Requirements for the base:
1. Concrete strength≥C25;
2. Flatness: the maximum altitude difference of 2M running rule<3mm.
3. The moisture content of the base<4%
Touch dry: 2 hours/ Hard dry: 2 day
Compressive strength (Mpa)
Impact resistance strength (Kg·cm)
Flexural strength (Mpa)
Adhesive force grade
Pencil hardness (H)
Abrasion resistance(750g/1000r, zero gravity, g)
Resistance to engine oil, diesel oil for 60 days
Resistance to 20% sulfuric acid for 20 days
Resistance to 20% Sodium hydroxide for 30 days
Resistance to toluene, ethanol for 60 days
1.Surface preparation:Correct substrate preparation is critical for optimum performance. Surface should be sound, clean, dry and free from loose particles, oil, grease, and other contaminants.
2.Primer: Prepare a barrel, pour JD-D10A and JD-D10B in it based on 1:1. Stir the mixture well and then apply it with roller or trowel. The reference consumption is 0.15kg/m².The main purpose of this primer is to seal the substrate completely and avoid air-bubbles in the body coat. A second coat may be required depending on the oil absorption condition of substrate. The recoat time is about 8 hours.
Inspection standard for the primer: even film with certain brightness.
3.Undercoat: Mix WTP-MA and WTP-MB based on 5:1 first, then add quartz powder (1/2 of the mixture of A and B) into the mixture, stir it well and apply with trowel. The consumption quantity of A and B is 0.5kg /sqm. You can do it one coat at one time or two coats at two times. In the second case, the application interval is about 8 hours at 25 degrees. Sand the first layer, clean it and then apply the second layer. After the whole application, wait another 8 hours, grind it, clean the sanding dust and then continue the next procedure.
Inspection standard for the undercoat: Non-sticky to hand, no softening, no nail print if you scratch the surface.
4. Top coat: Mix JD-2000A and JD-2000 B based on 5:1 and then apply the mixture with spatula. The consumption quantity is 1.0kg/sqm.
5. Maintenance: 5-7 days. Don’t put the floor into use or wash it with water or other chemicals.
Packaging & Shipping
Wood pallet :
Why Choose us?
1.One of the top 5 Chemical Company in China.
2.Rich experience in Transport of Chemical liquid goods.
3.Response timely with professional workable advise.
4.Wide range of chemical product provided,your best one-step purchase choice.